Article Sidebar

Download
pdf
Statistic
Read Counter : 551 Download : 1142

Downloads

Download data is not yet available.

Main Article Content

Abstract

Perusahaan Umum Daerah  Air Minum  (PDAM) Kota Magelang merupakan salah satu unit usaha milik Pemerintah Daerah Kota Magelang yang bergerak dalam jasa mendistribusikan air bersih bagi masyarakat Kota Magelang .  Dalam  usahanya untuk memenuhi kebutuhan air bersih pelanggannya, PDAM menggunakan 5 mata air yang salah satunya adalah mata air kanoman di Sudimoro, Candimulyo, Kabupaten  Magelang .


Secara geografis letak mata air tersebut ketinggiannya berada dibawah  kota Magelang, maka pendistribusian air bersih dari mata air kanoman kepada pelanggan menggunakan sistem pompa sentrifugal. Untuk menjamin  fungsi pompa beroperasi secara optimal maka perlu kebijakan perawatan  agar  fungsi sistem tersedia. Metode Failure Mode Effect Analysis (FMEA), Logic Tree Analysis (LTA) dan Maintenance Task digunakan untuk menganalisis komponen agar fungsi sistem dapat dijamin ketersediaannya. Berdasarkan analisis dapat diputuskan kebijakan breakdown maintenance dan tindakan perawatan dengan metode yang lain.

Keywords

Kebijakan Perawatan, Pompa Sentrifugal, Breakdown Maintenance

Article Details

References

  1. Abdullah, B., Maitimu, N.E. and Tupan, J.M. (2016) ‘Usulan Perencanaan Perawatan Preventif Berbasis Keandalan Untuk Alat Automatic Tank Gauging (ATG)’, Agustus, 10(2). https://ojs3.unpatti.ac.id/index.php/arika/article/view/434.
  2. Abdurrahman, H. (2017) Perencanaan Jadwal Pemeliharaan Preventif Mesin Plate Heat Exchanger Di KUD DAU. Universitas Brawijaya.
  3. https://www.academia.edu/32392993/Perencanaan_Jadwal_Pemeliharaan_Preventif_Mesin_PHE_Di_KUD_DAU.
  4. Afefy, I.H. et al. (2019) ‘A New Framework of Reliability Centered Maintenance’, JJMIE, 13(3). http://jjmie.hu.edu.jo/vol-13-3/88-19-01.
  5. Afrizal, F. and Yuniarto, M.N. (2015) ‘Analisa Kerusakan Centrifugal Pump P951E di PT. Petrokimia Gresik’. http://digilib. its. ac. id/public/ITS-paper-29286-2108100150.
  6. Ahmed, M.N. (2019), "The use of performance-based contracting in managing the outsourcing of a reliability-centered maintenance program: A case study", Journal of Quality in Maintenance Engineering, Vol. 26 No. 4, pp. 526-554.
  7. https://www.ingentaconnect.com/content/mcb/154/2019/00000026/00000004/art00002
  8. Cantona, P., Abadi, C.S. and Syujak, M. (2019) ‘Analisis head loss dan kavitasi dari rangkaian pompa sentrifugal ebara di PT. PBI’, Seminar Nasional Teknik Mesin, pp. 87–93. https://prosiding.pnj.ac.id/index.php/sntm/article/view/2003/1116.
  9. Duffuaa, S.O. and Raouf, A. (2015) ‘Reliability-centered maintenance’, in Planning and Control of Maintenance Systems. Springer, pp. 245–260. https://link.springer.com/book/10.1007/978-3-319-19803-3.
  10. Ebeling, C.E. (2019) An introduction to reliability and maintainability engineering. Waveland Press. https://www.waveland.com/browse.php?t=392.
  11. Emovon, I., Norman, R.A. and Murphy, A.J. (2016) ‘Elements of maintenance system and tools for implementation within framework of Reliability Centred Maintenance-A review’, Journal of Mechanical Engineering and Technology (JMET), 8(2), pp. 1–34. https://journal.utem.edu.my/index.php/jmet/article/view/640/978.
  12. Eriksen, S., Utne, I.B. and Lützen, M. (2021) ‘An RCM approach for assessing reliability challenges and maintenance needs of unmanned cargo ships’, Reliability Engineering & System Safety, 210, p. 107550. https://ideas.repec.org/a/eee/reensy/v210y2021ics0951832021001058.-html.
  13. Eti, M.C., Ogaji, S.O.T. and Probert, S.D. (2007) ‘Integrating reliability, availability, maintainability and supportability with risk analysis for improved operation of the Afam thermal power-station’, Applied Energy, 84(2), pp. 202–221.
  14. https://www.sciencedirect.com/science/article/abs/pii/S0306261906000675.
  15. Martins, L. et al. (2020) ‘Improving preventive maintenance management in an energy solutions company’, in Procedia Manufacturing. Elsevier B.V., pp. 1551–1558. Available at: https://doi.org/10.1016/j.promfg.2020.10.216.
  16. Pochampally, K.K. and Gupta, S.M. (2016) Reliability analysis with Minitab. CRC Press. https://www.taylorfrancis.com/books/mono/10.1201/b19630/reliability-analysis-minitab-kishore-kumar-pochampally-surendra-gupta.
  17. Ramadhan, R.H. (2017) ‘Analisis Perencanaan Pemeliharaan Mesin Henke Dengan Metode RCM (Reliability Centered Maintenance) ’, PhD Thesis [Preprint], (STIE Ekuitas). http://repository.ekuitas.ac.id/handle/123456789/280?show=full.
  18. Riseno Rasindyo, M. and Helianty, Y. (2015) ‘Analisis Kebijakan Perawatan Mesin Cincinnati Dengan Menggunakan Metode Reliability Centered Maintenance Di PT. Dirgantara Indonesia *’, Jurnal Online Institut Teknologi Nasional Januari, 03(1).
  19. https://adoc.pub/analisis-kebijakan-perawatan-mesin-cincinnati-dengan-menggun.html
  20. Rosihan, R.I. and Yuniarto, H.A. (2019) ‘Analisis Sistem Reliability dengan Pendekatan Reliability Block Diagram’, Jurnal Teknosains, 9(1), pp. 57–67.
  21. https://jurnal.ugm.ac.id/teknosains/article/view/36758.
  22. Schrepp, M. (2020) On the Usage of Cronbach’s Alpha to Measure Reliability of UX Scales, Journal of Usability Studies. https://uxpajournal.org/cronbachs-alpha-reliability-ux-scales/
  23. Šerbetar, I. and Sedlar, I. (2016) ‘Assessing reliability of a multi-dimensional scale by coefficient alpha’, Journal of Elementary Education, 9(1/2), pp. 189–196.
  24. http://rei.pef.um.si/images/Izdaje_revije/2016/1-2/REI_9_1-2_cl_14.pdf.
  25. Sharma, K.D. and Srivastava, S. (2018) ‘Failure mode and effect analysis (FMEA) implementation: a literature review’, J Adv Res Aeronaut Space Sci, 5, pp. 1–17.
  26. https://issuu.com/adrpublications/docs/924-2893-1-pb.
  27. Sintef, N. (2015) ‘Offshore and Onshore Reliability Data’, OREDA Handbook, 6th ed, DNV, Oslo.
  28. https://www.nri.ac.ir/Portals/0/images/Technology/OandM/document/OREDA.
  29. Sodikin, J. and Jati, U.S. (2022) ‘Analisa Kerusakan Transmisi Otomatis dengan Metode Failures Mode and Effects Analysis (FMEA) dan Logic Tree Anaysis (LTA)’, Accurate: Journal of Mechanical Engineering and Science, 03(01), pp. 13–21. Available at: https://doi.org/10.35970/accurate.v3i1.1273.
  30. Sürücü, L. and Maslakçi, A. (2020) ‘Validity and reliability in quantitative research’, Business & Management Studies: An International Journal, 8(3), pp. 2694–2726.
  31. https://www.researchgate.net/publication/344379869_Validity_and_Reliability_in_Quantitative_Research.