Article Sidebar

Download
PDF
Statistic
Read Counter : 853 Download : 301

Downloads

Download data is not yet available.

Main Article Content

Abstract

Alternative fuels were developed by blending crude coconut oil and bio-carbon nanoparticles. Bio-carbon, derived from sago waste via pyrolysis and ground using a ball mill, underwent FTIR testing to assess its energy absorption capabilities. SEM analysis was conducted to examine the surface morphology of bio-catalyst with and without crude coconut oil. The findings indicate that incorporating bio-catalyst can enhance mechanical properties, facilitating rapid heat absorption, as evidenced by reduced flashpoint and viscosity. In addition, the results show an increase in fuel mass, broadening of molecular contacts, increased reactivity, and increased heat absorption for easier ignition. This phenomenon indicates that bio-carbon of sago waste have great potential for biofuel use as a homogeneous combustion catalyst.

Keywords

Sago waste Bio-carbon Bio-catalyst Nanoparticles Mechanical properties

Article Details

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

References

  1. X. Wang, Y. Lu, C. Chen, X. Yi, and H. Cui, “Total-factor energy efficiency of ten major global energy-consuming countries,” Journal of Environmental Sciences, vol. 137, pp. 41–52, Mar. 2024, doi: 10.1016/j.jes.2023.02.031.
  2. M. Setiyo, “Alternative fuels for transportation sector in Indonesia,” Mechanical Engineering for Society and Industry, vol. 2, no. 1, pp. 1–6, 2022, doi: 10.31603/mesi.6850.
  3. L. Janota, K. Vávrová, and R. Bízková, “Methodology for strengthening energy resilience with SMART solution approach of rural areas: Local production of alternative biomass fuel within renewable energy community,” Energy Reports, vol. 10, pp. 1211–1227, 2023, doi: 10.1016/j.egyr.2023.07.057.
  4. A. W. Rennuit-Mortensen, K. Dalgas Rasmussen, and M. Grahn, “How replacing fossil fuels with electrofuels could influence the demand for renewable energy and land area,” Smart Energy, vol. 10, no. December 2022, p. 100107, 2023, doi: 10.1016/j.segy.2023.100107.
  5. A. Janzwood and K. Harrison, “The political economy of fossil fuel production in the Post-Paris Era: Critically evaluating Nationally Determined Contributions,” Energy Research & Social Science, vol. 102, p. 103095, Aug. 2023, doi: 10.1016/j.erss.2023.103095.
  6. H. Riupassa, S. Suyatno, and H. Y. Nanlohy, “Identifying the Effect of Aromatic Compounds on the Combustion Characteristics of Crude Coconut Oil Droplet,” Eastern-European Journal of Enterprise Technologies, vol. 2, no. 6–122, pp. 6–14, 2023, doi: 10.15587/1729-4061.2023.272289.
  7. H. Y. Nanlohy and H. Riupassa, “An Experimental Study on the Ignition Behavior of Blended Fuels Droplets with Crude Coconut Oil and Liquid Metal Catalyst,” Automotive Experiences, vol. 3, no. 2, pp. 39–45, 2020.
  8. A. Sule, Z. A. Latiff, M. A. Abbas, I. Veza, and A. C. Opia, “Recent Advances in Diesel-Biodiesel Blended with Nano-Additive as Fuel in Diesel Engines: A Detailed Review,” Automotive Experiences, vol. 5, no. 2, pp. 182–216, 2022, doi: 10.31603/ae.6352.
  9. H. Y. Nanlohy, I. N. G. Wardana, N. Hamidi, L. Yuliati, and T. Ueda, “The effect of Rh3+ catalyst on the combustion characteristics of crude vegetable oil droplets,” Fuel, vol. 220, pp. 220–232, 2018.
  10. Wardoyo, A. S. Widodo, W. Wijayanti, and I. N. G. Wardana, “The Role of Areca catechu Extract on Decreasing Viscosity of Vegetable Oils,” Scientific World Journal, vol. 2021, 2021, doi: 10.1155/2021/8827427.
  11. M. Setiyo, D. Yuvenda, and O. D. Samuel, “The Concise Latest Report on the Advantages and Disadvantages of Pure Biodiesel (B100) on Engine Performance: Literature Review and Bibliometric Analysis,” Indonesian Journal of Science and Technology, vol. 6, no. 3, pp. 469–490, 2021, doi: https://doi.org/10.17509/ijost.v6i3.38430.
  12. R. Manimaran, T. Mohanraj, and R. Ashwin, “Green synthesized nano-additive dosed biodiesel-diesel-water emulsion blends for CI engine application: Performance, combustion, emission, and exergy analysis,” Journal of Cleaner Production, vol. 413, Aug. 2023, doi: 10.1016/j.jclepro.2023.137497.
  13. S. R. Ariyanto, S. Suprayitno, and R. Wulandari, “Design of Metallic Catalytic Converter using Pareto Optimization to Improve Engine Performance and Exhaust Emissions,” Automotive Experiences, vol. 6, no. 1, pp. 200–2015, Apr. 2023, doi: 10.31603/ae.7977.
  14. W. Anggono et al., “Engine Performances of Lean Iso-Octane Mixtures in a Glow Plug Heated Sub-Chamber SI Engine,” Automotive Experiences, vol. 5, no. 1, pp. 16–27, Nov. 2021, doi: 10.31603/ae.5118.
  15. A. Yudianto and P. Li, “Influence of Compression Ratio on Flywheel Dimension for a Naturally Aspirated Spark Ignition Engine: A Numerical Study,” Automotive Experiences, vol. 3, no. 2, May 2020, doi: 10.31603/ae.v3i2.3530.
  16. H. Y. Nanlohy, I. N. G. Wardana, N. Hamidi, L. Yuliati, and T. Ueda, “The effect of Rh3+ catalyst on the combustion characteristics of crude vegetable oil droplets,” Fuel, vol. 220, 2018, doi: 10.1016/j.fuel.2018.02.001.
  17. C. Jin et al., “Effect of nanoparticles on diesel engines driven by biodiesel and its blends: A review of 10 years of research,” Energy Conversion and Management, vol. 291, p. 117276, Sep. 2023, doi: 10.1016/j.enconman.2023.117276.
  18. B. V. Bot, P. J. Axaopoulos, E. I. Sakellariou, O. T. Sosso, and J. G. Tamba, “Energetic and economic analysis of biomass briquettes production from agricultural residues,” Applied Energy, vol. 321, p. 119430, Sep. 2022, doi: 10.1016/j.apenergy.2022.119430.
  19. A. T. Mohammed, M. F. M. Said, N. Othman, A. C. Opia, and I. Veza, “Feasibility Study of Biofuel Incorporated Nanoparticles as Sustainable IC Engine Fuel: Opportunities and Challenges - An overview,” Automotive Experiences, vol. 6, no. 1, pp. 94–121, Apr. 2023, doi: 10.31603/ae.7846.
  20. “No Title,” doi: 10.31603/ae.10311.
  21. H. Y. Nanlohy, I. N. G. Wardana, M. Yamaguchi, and T. Ueda, “The role of rhodium sulfate on the bond angles of triglyceride molecules and their effect on the combustion characteristics of crude jatropha oil droplets,” Fuel, vol. 279, p. 118373, 2020, doi: https://doi.org/10.1016/j.fuel.2020.118373.
  22. S. Lopatin, A. Elyshev, and A. Zagoruiko, “Catalytic device for environmentally friendly combustion of liquid fuels on the base of structured glass-fiber catalyst,” Catalysis Today, no. September 2020, 2021, doi: 10.1016/j.cattod.2021.02.010.
  23. M. Mukherjee, G. Goswami, P. K. Mondal, and D. Das, “Biobutanol as a potential alternative to petroleum fuel: Sustainable bioprocess and cost analysis,” Fuel, vol. 278, no. May, p. 118403, 2020, doi: 10.1016/j.fuel.2020.118403.
  24. M. E. M. Soudagar, N. N. Nik-Ghazali, M. Abul Kalam, I. A. Badruddin, N. R. Banapurmath, and N. Akram, “The effect of nano-additives in diesel-biodiesel fuel blends: A comprehensive review on stability, engine performance and emission characteristics,” Energy Conversion and Management, vol. 178, pp. 146–177, Dec. 2018, doi: 10.1016/j.enconman.2018.10.019.
  25. M. E. M. Soudagar et al., “The effects of graphene oxide nanoparticle additive stably dispersed in dairy scum oil biodiesel-diesel fuel blend on CI engine: performance, emission and combustion characteristics,” Fuel, vol. 257, p. 116015, 2019, doi: 10.1016/j.fuel.2019.116015.
  26. S. Daud, M. A. Hamidi, and R. Mamat, “Design of Experiment to Predict the Effects of Graphene Nanoplatelets Addition to Diesel Engine Performance,” Automotive Experiences, vol. 5, no. 3, pp. 467–476, Sep. 2022, doi: 10.31603/ae.6263.
  27. M. S. Gad et al., “A comprehensive review on the usage of the nano-sized particles along with diesel/biofuel blends and their impacts on engine behaviors,” Fuel, vol. 339, May 2023, doi: 10.1016/j.fuel.2022.127364.
  28. A. A. Azahar, M. D. Nurhafizah, M. R. Omar, N. Abdullah, and A. Ul-Hamid, “Bio-graphene production from oil palm shell waste valorised through sequential thermal and catalytic means,” Carbon Trends, vol. 9, 2022, doi: 10.1016/j.cartre.2022.100225.
  29. V. W. Khond and V. M. Kriplani, “Effect of nanofluid additives on performances and emissions of emulsified diesel and biodiesel fueled stationary CI engine: A comprehensive review,” Renewable and Sustainable Energy Reviews, vol. 59, pp. 1338–1348, 2016, doi: 10.1016/j.rser.2016.01.051.
  30. V. Saxena, N. Kumar, and V. K. Saxena, “A comprehensive review on combustion and stability aspects of metal nanoparticles and its additive effect on diesel and biodiesel fuelled CI engine,” Renewable and Sustainable Energy Reviews, vol. 70, pp. 563–588, 2017, doi: 10.1016/j.rser.2016.11.067.
  31. T. Sathish et al., “Pore size variation of nano-porous material fixer on the engine bowl and its combined effects on hybrid nano-fuelled CI engine characteristics,” Fuel, vol. 345, Aug. 2023, doi: 10.1016/j.fuel.2023.128149.
  32. E. Taer et al., “Production of Activated Carbon Electrodes from Sago Waste and its application for an Electrochemical Double-Layer Capacitor,” International Journal of Electrochemical Science, vol. 13, no. 11, pp. 10688–10699, Nov. 2018, doi: 10.20964/2018.11.27.
  33. Suyatno, H. Riupassa, S. Marianingsih, and H. Y. Nanlohy, “Characteristics of SI engine fueled with BE50-Isooctane blends with different ignition timings,” Heliyon, vol. 9, no. 1, p. e12922, Jan. 2023, doi: 10.1016/J.HELIYON.2023.E12922.
  34. Y. Duan, A. Zhong, Z. Huang, and D. Han, “Theoretical study on hydrogen abstraction reactions from cyclopentanol by hydroxyl radical,” Fuel, vol. 297, no. March, p. 120766, 2021, doi: 10.1016/j.fuel.2021.120766.
  35. Y. Feng et al., “The mechanism of ethanol blending on the variation of chemical heat sink in n-decane thermal cracking process,” Fuel, vol. 353, p. 129204, Dec. 2023, doi: 10.1016/j.fuel.2023.129204.
  36. H. Y. Nanlohy and Trismawati, “The role of fatty acid of Morinda citrifolia oil as surface-active chemicals on the deinking process of waste paper,” Materialia, vol. 23, p. 101436, Jun. 2022, doi: 10.1016/J.MTLA.2022.101436.
  37. A. O. Yusuff, N. Yahya, M. A. Zakariya, and S. Sikiru, “Investigations of graphene impact on oil mobility and physicochemical interaction with sandstone surface,” Journal of Petroleum Science and Engineering, vol. 198, p. 108250, Mar. 2021, doi: 10.1016/j.petrol.2020.108250.
  38. G. E. Yergaziyeva, Mambetova, and K. Dossumov, “Influence of preparation method on the activity of molecular sieve KA catalysts modified with zinc and phosphorus oxides in the non-oxidative thermocatalytic conversion of ethanol to aromatic hydrocarbons,” South African Journal of Chemical Engineering, vol. 43, pp. 60–66, Jan. 2023, doi: 10.1016/j.sajce.2022.10.001.
  39. H. Y. Nanlohy, I. N. G. Wardana, N. Hamidi, and L. Yuliati, “Combustion characteristics of crude jatropha oil droplets using rhodium liquid as a homogeneous combustion catalyst,” in IOP Conference Series: Materials Science and Engineering, 2018, vol. 299, no. 1, p. 12090.
  40. H. Y. Nanlohy, “Comparative Studies on Combustion Characteristics of Blended Crude Jatropha Oil with Magnetic Liquid Catalyst and DEX under Normal Gravity Condition,” Journal of Mechanical Engineering Science and Technology, vol. 5, no. 2, pp. 79–88, 2021, doi: 10.17977/um016v5i22021p079.

Most read articles by the same author(s)

1 2 3 4 > >>